.jpg)
FNW2
Colour
Technical Data
last update: 25/08/2026Description
Modular lighting system provided with adjustable rods made in extruded aluminium with joint and mechanical blocking device with screw. Extruded aluminium structure. Tecnopolymer cardan joints which allow 45°rotation on the horizontal and the vertical axis. Lamp-holding rings made in die cast aluminium. Tecnopolymer lampholder cover plates. Bases with multipolar connecting block for ceiling or wall mounting.
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Aluminium
Photometric data
Details
lm system
W system
lm source
W source
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Optic and beam angle
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
Voltage
220-240 VAC
Power Supply
Electronic Control gear included
Mounting options
Integral
Installation
Description
The luminaire can be fitted to the wall or the ceiling using the suspension rods which cover the base mounted with fischer screws.;
Mounting
Ceiling surface
Wiring
Provided with two electronic transformers with thermal cut-out for 6x35W metal halide lamps. Complete with silicone cables with fibre glass cord. The extruded-aluminium section comprising the fuse and terminal boards is completely covered by a special plate (included).
Notes
For the photometric data of the fitting refer to the photometric data of the light sources used. The position of the anchoring rods may be modified. With high-performance reflector