.jpg)
J777
Colour
Technical Data
last update: 21/10/2025Description
Interface for Quick BLE system. Operates in combination with BLE-DALI interfaces.
Allows the connection of 4 push-buttons single pole (SPST) and normally open (N.O.) Functions: General ON/OFF and dim, ON/OFF and dim of Group1, Group2, Group3 connected to the Quick BLE system.
It is powered by the DALI line; current drawn 6 mA (3 DALI loads) -
push terminals.
Operating temperature 0 ... +60 °C
Dimensions
General (mm)
47x28x14
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Weight (kg)
0.2
Material
Polycarbonate
Photometric data
Details
lm system
W system
lm source
W source
Luminous efficiency - lm/W (system value)
Optic and beam angle
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
Power Supply
Electronic Driver not included
Mounting options
Remote
Control
DALI
Installation
Description
can be placed into the electrical box that houses the push-buttons.;
Wiring
The push-buttons are connected to the device via 5 cables (1 common cable and 4 separate cables, from T1 to T4). Maximum distance of buttons from device: 50 cm.
The bus cables can be connected to any point of the DALI line.
Notes
Supplied with 7 cable lengths (25 cm long)
PC sheath material, halogen-free.
The J777 command acts ONLY on the BLE-DALI interface it is connected to and is not retransmitted to the other BLE system interfaces through the mesh network.
The J777 command acts ONLY on the BLE-DALI interface it is connected to and is not retransmitted to the other BLE system interfaces through the mesh network.