.jpg)
MB29
Colour
Technical Data
last update: 02/07/2026Description
Spotlight with clean lines designed for lay-on installation; particularly suitable for mounting on cornices, architraves and shelves. The centrally-located joint system ensures easy orientation in all directions. LED light source with passive cooling system. Extruded aluminium components body with die-cast aluminium end caps. Shaped fixing plate made of galvanised sheet steel. Die-cast aluminium optical assembly, joints and arms. PMMA emission optics - medium angle. Orientation capacity: -35°/+90° around the horizontal axis; 359° around the vertical axis.
Dimensions
General (mm)
272x218x231
Diameter (mm)
ø80
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Aluminium and thermoplastic
Product certification
-
CE -
ENEC-03
Photometric data
Details
lm system
833.79
W system
25.5
lm source
1148
W source
17
Luminous efficiency - lm/W (system value)
32.7
lm in emergency mode
-
Maximum intensity (cd)
3177
Total light flux at or above an angle of 90° (Lm)
0
Light output ratio (LOR)
73
Optic and beam angle
M - Medium 20°
Adjustability
directional
Light colour quality
CRI 87
Colour temperature
3000 K
Lifetime LED 1
50,000h - L80 - B20 (Ta 25°C)
Charts and polar curves
Electrical data
Voltage
230
ZVEI code
LED
Power Supply
Electronic Control gear included
Mounting options
Integral
Dimmable option
Dimmable
Control
1-10V
Installation
Description
Besides the lay-on installation on horizontal surfaces, the luminaire can be installed on vertical walls and 180° upside down, ensuring optimal aiming in any situation. The fixing plate is anchored with screws and wall plugs, and the component body is then attached to it mechanically.;
Mounting
Wall surface, Ceiling surface
Wiring
Inclusive of 1-10V dimmable control gear incorporated into the component body; wiring to power supply on fixing plate through plug-in terminal block; configured for pass-through wiring with protective grommet.