.jpg)
N350
Colour
Technical Data
last update: 25/08/2026Description
Spotlight with clean lines designed for lay-on installation; particularly suitable for mounting on cornices, architraves and shelves. The centrally-located joint system ensures easy orientation in all directions. LED light source with high colour rendering index. Forced heat dissipation system through fan with magnetic anti-friction operation, guaranteeing efficiency and maximum silence over time. Extruded aluminium components body with die-cast aluminium end caps. Shaped fixing plate made of galvanised sheet steel. Die-cast aluminium optical assembly, joints and arms. PMMA emission optics - spot beam. Orientation capacity: -35°/+90° around the horizontal axis; 359° around the vertical axis. Optic screens with separate code are available for varying the light beam angle.
Dimensions
General (mm)
270x293x142
Diameter (mm)
ø115
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Aluminium and thermoplastic
Product certification
-
CE -
ENEC-03
Photometric data
Details
lm system
2610.58
W system
41.5
lm source
2900
W source
35
Luminous efficiency - lm/W (system value)
62.91
lm in emergency mode
-
Maximum intensity (cd)
20629
Total light flux at or above an angle of 90° (lm)
0
Light output ratio (LOR)
90
Optic and beam angle
S - Spot 14°
Adjustability
directional
Light colour quality
CRI 97 - Rf (Colour Fidelity Index) 96 - Rg (Gamut Index) 102
Colour temperature
3000 K
MacAdam Step
3
Lifetime LED 1
>50,000h - L90 - B10 (Ta 25°C)
Lifetime LED 2
Charts and polar curves
Electrical data
Operating ambient temperature range (C°)
Supply voltage
220-240 VAC
ZVEI code
LED
Power Supply
Electronic Driver included
Mounting options
Integral
Installation
Description
Besides the lay-on installation on horizontal surfaces, the luminaire can be installed on vertical walls and 180° upside down, ensuring optimal aiming in any situation. The fixing plate is anchored with screws and wall plugs, and the component body is then attached to it mechanically.
Mounting
Wall surface, Ceiling surface
Wiring
Inclusive of electronic control gear incorporated into the component body; wiring to power supply on fixing plate through plug-in terminal block; configured for pass-through wiring with protective grommet.
Notes
The light emission can be varied by adding optional supplementary optics: medium - MXG3 (30° beam) flood - MXG4 (46° beam) oval - MXG5 (50° / 15°). The fans have an anti-dust protection system and thermal circuit-breaker for safety.