SU16

Organic Response wireless multi-sensor with lux and motion detector, for suspension installation on rigid electrical pipe/conduit (not supplied). Supplied with a base and top cover that allow installation on pipe with end thread and pair of locking nuts (not supplied). Connects to a line of DALI lighting fixtures and controls them in broadcast mode (all execute the same commands). IR, Wirepas, Bluetooth communication technology, and PIR detection. In basic systems with Plug&Play configuration, the Organic Response multi-sensor allows the fixtures to operate in stand-alone mode (motion control) and to communicate simultaneously with other nearby Organic Response multi-sensors. This creates a collaborative network of lighting fixtures via wireless communication (IR). The external multi-sensor also communicates with fixtures equipped with an integrated Organic Response sensor (e.g.. Spacepad, iN60 Evo, Light Shed 14, Libera...). For additional features such as enabling daylight control, pairing a wireless button, creating zones and modifying operating parameters, you can use the Organic Response Express app available on the App Store and Play Store. In this case, it will be necessary to commission the system. Wireless security standard: AES-128. Accessories such as BLE buttons, dongles and gateways are available for a system architecture connected to the Organic Response Portal, with which you can take advantage of additional multi-sensor features such as Analytics, including information on space occupancy and energy consumption. Integrated beacon that can be activated via the Organic Response Portal (iBeacon protocol). For features connected to the Organic Response portal, a subscription is required: contact iGuzzini for this need. DALI power supply included in the kit.

The external multi-sensor can be installed suspended on a common rigid conduit for electrical cables, with a diameter of 20 mm (max 22). The base + cover locking to the pipe must be secured by a special pair of low-thickness nuts (max 4 mm, not supplied). Dimensions Ø 75 x h 45 mm (base + multi-sensor + cover) The power supply can be freely positioned remotely. For the passage of the cable inside the suspension pipe, consider the length of the multi-sensor cable (1 m). Positioning height for Plug & Play operation: min 2.7 m / max 3.7 m. Distance between multi-sensors for Plug & Play operation: min 1.0 m / max 3.0 m. It is possible to use lower positioning heights and greater interdistances by customising the operation with the app. Typical coverage diameter of the motion sensor: 4.8 m (@ 2.7 m h of installation).;

Specifications: -Number of DALI drivers that can be connected: min1-max12 (max 24 mA). -Compatible with DALI and DALI-2 fixtures, operation of the fixtures in Broadcast mode. -Compatible with Tunable White DT8 fixtures. -Wireless frequency 2.4 GHz / IR 38 kHz. -Sensor-smartphone-button connection: Bluetooth. Plug&Play Default Values (modifiable by app): -Personality: Open Floor (100,100, 70, 40, 10) -Maximum light level when present (max light): 100% -Wait before switching to low light level (dwell time): 10 min -Light level at low (low light): 10% -Time at low light level (low light time): 10 min -Minimum light value after the low level time (min light): 0% (OFF) -Daylight control: disabled and can be activated by app -Mesh RF sensor-sensor-gateway X685: Wirepas, maximum distance 8m (in a straight line without obstacles). For advanced programming with the Organic Response portal, the X685 gateway is required.