.jpg)
T387
Colour
Technical Data
last update: 25/08/2026Description
Indoor up-down luminaire for 1x70W HIT metal halide lamp with down-light emission and 1x150W HIT metal halide lamp with up-light emission. Made up of turned aluminium body and bent extruded aluminium ring joined to the body with screws on spacers. PG11 for waterproof power supply cable. Tempered protection glasses with silicone gaskets fixed to the body with bayonet screws, aluminium component-holding plate with steel screws, power supply unit with power factor correction and anti-short circuit protection system. 99.85% superpure aluminium optics with polishing and sandblasting finish, 70°-120° adjustment device for downlight emission and anti-glare spill-ring.
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Aluminium
Photometric data
Details
lm system
W system
lm source
W source
Luminous efficiency - lm/W (system value)
lm in emergency mode
-
Optic and beam angle
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range
from -20°C to +35°C.
Voltage
220-240 VAC
Power Supply
Electromagnetic Control gear included
Mounting options
Integral
Installation
Description
Suspended by means of rigid aluminium rods with +/-80 mm adjustment device, aluminium base for wall or ceiling installation and aluminium trapezoidal element for luminaire support. Suspended by means of steel cables with piston fixing system and aluminium power supply base.;
Mounting
Ceiling pendant
Wiring
Wiring for 1x70W HIT and 1x150W HIT discharge lamps contained inside the body of the luminaire. Fast-coupling terminal boards for easy installation.