X823

Art-Net / SPI (Serial Peripheral Interface) Gateway with 4 x SPI outputs with 1024 channels, totalling 4096 channels. Synchronous type communication (Data, Ck), that allows high speeds to be reached - up to 60fps*- and improves the definition of dynamic effects.
Each output can operate a max line of 21 m of Underscore InOut Pixel (256 "dots" RGBW). Tot. 84 m.
Ethernet side: 2 x RJ45 ports are available for connecting the Art-Net signal (DMX over Ethernet) in sequence (max 48 in/out Gateway). Equipped with an alphanumerical display (16x2) and 4 directional buttons for setting and controlling shows. The 3 rotary switches on the front allow the setting of the least significant byte of the assigned IP. Power/Mode/Boot/OK warning LEDs and multicolour state LED for the 4 SPI outputs. The Gateway includes an auto-addressing function for the sequential patching of each SPI output. An onboard micro-SD memory allows shows to be recorded so they can be used in stand-alone mode, in the event of a Gateway being applied as the only control device. The gateway must be powered with an iGuzzini range 24 Vdc power supply unit. Absorbed power 4 W.

Mounted on the DIN bar inside the electical boxes. Includes 2 slots on the back for fastening with screws.;

(*) The maximum speed depends on the number of pixels and the system architecture