.jpg)
X783
Colour
Technical Data
last update: 06/08/2026Description
Kit for Citygrid Gateway pole-installation consisting of a plastic base that is concave on one side and an 8 m long cable with an IP connector plus a safety locknut.
The Gateway (not included) is fixed to the base supplied in the Kit using 2 self-tapping screws (included).
The cable supplied with this Kit is a 2 conductor cable, that powers the Gateway and therefore does not allow an internal relay to be used.
Dimensions
General (mm)
15x57x146
Technical performance
Complies with EN60598-1 and pertinent regulations
Physical properties
Material
Thermoplastic
Photometric data
Details
lm system
W system
lm source
W source
Luminous efficiency - lm/W (system value)
Optic and beam angle
Colour temperature
Lifetime LED 1
Lifetime LED 2
Electrical data
Operating ambient temperature range (C°)
Installation
Description
The base is fixed to the pole using 2 self-tapping screws (not included). A hole must be drilled in the pole to allow the cable and connector (that exit the rear of the Gateway) to pass through it.;
Wiring
The Kit’s cable and connector must be connected to the 220-240 Vac electrical network via two conductors (L-N).
Notes
Consult the pole manufacturer for more information about drilling and an eventual successive protection.
Additional Information
Description
Available, at the moment, for the European market only.